Passport (in russian) SVS-50 : Download (134 Kb)
Manual (in russian) SVS-50 : Download (553 Kb)

Functions of test bench SVS-50

• High-voltage test bench SVS-50 is intended for testing insulating properties of protective equipment (insulating bars, rubber boats, gloves, an electrical tool, etc.) by variable high voltage of industrial frequency that is adjusted within the limits of 0 – 50kV.
• Test bench SVS-50 is intended for operation inside heated buildings.

The service conditions of test bench SVS-50 are:

a range of air temperatures, оС	от 0 до +40
relative air moisture at a temperature of 25 оС	up to 80 %
atmospheric pressure, mm. hg	650 and 800

Service of test bench SVS-50 is provided by one operator with the admission to working in circuits with voltage over 1000 V. The operator should have the third or a higher category of industrial safety to be permitted to work with electrical installations having voltage over 1000V.

Technical Data of Test Bench SVS-50

General parameters of test bench SVS-50

Power supply is a single-phase network of an alternating current	with the voltage of 220 20 V, the frequency of 50 2 Hz
Power consumption up to, watt	2000
Quantity of high variable voltage sources	1
The area of the test bench (recommended), m2	2х2
Weight of the equipment up to, kg	100
Test bench SVS-50 equipment life, years	10

The Source Parameters

Parameter	Type of a source is BHT-50 (AID-70/50)
The highest output voltage, kV	50
The highest output current, mA	50
Overall dimensions, mm	350х315х625
Weight, kg	35

The Test Bath Parameters

Quantity of testing electrodes	4
Overall dimensions, mm	800х280х630
Weight at a dry condition, kg, no more than	10

The Kilovoltmeter Parameters

Measurement limits of voltage of an alternating current, kV	0,1; 3; 15; 50
A reduced relative error of measurement, %, no more than	3

The Alternating-Current Meter Parameters

Measurement limits, mA	1, 10
A reduced relative error of measurement, %, no more than	4